Description:

This instrument is controlled by intelligent microcontroller chip, with high accuracy and high reliability; it can be used to measure grounding resistance of various power facilities wiring, electrical equipment, lightning protection equipment and other grounding devices, and it can also measure ground voltage. (Note: This instrument is not suitable for harsh outdoor environmental conditions, such as raining, lightning, etc.)

Features:

Digital Earth Resistance Tester possesses the following features:

backlight and battery detection function.

data holding.

It can be used for precise three-wire measurement or simple

two-wire measurement.

When measuring ground resistance, if C or E end of test lead is

not in good contact, —- Ω warning appears on LCD.

OL stands for over range.

Double insulation or reinforced insulation safety structure

Specifications:

BRAND: BENETECH

MODEL: GT5105A Ground Resistance Tester

1.1 Measurement range and measurement error

(under condition of 20℃±5℃and≤75%RH)

Basic Function    Range    Accuracy    Resolution

Ground    20Ω    ±(2%+10)    0.01Ω

resistance    200Ω    ±(2%+3)    0.1Ω

    2000Ω    ±(2%+3)    1Ω

    2000Ω（two wires)    ±(2%+5)    1Ω

Ground voltage    200V    ±(2%+5)    0.1V

1.2 Application standard:

IEC 61010-1 CAT.Ⅲ 600V Pollution degree 2

CAT.Ⅰ 5000V Pollution degree 2

IEC 61326-1 (EMC standard)

IEC 60529 (IP40)

1.3 measurement method:

(1) Ground voltage measurement: average response

(2) Ground resistance measurement: test signal frequency:

about 820Hz, current: 20Ω about 3.2mA

1.4 Working environment: temperature: 5℃~ 40℃; relative

humidity: ≤80 ~ RH (no fog) Altitude≤2000 meters

1.5 Storage conditions: temperature: -20 ~ 60 ℃; relative

humidity: ≤70% RH (no fog)

1.6 Power supply: 9V power supply [1.5V (No. 5 alkaline

battery) * 6]

1.7 Overload protection:

Ground resistance: 200V AC (10 seconds)

Ground voltage: 400V AC (30 seconds)

1.8 Insulation resistance: The insulation resistance between

measurement circuit and case is not less than 20MΩ

1.9 Dimensions: 176mm * 77mm * 110mm

What s in the box:

GT5105A Ground Resistance Tester x 1

Subtotal	$0.00
Total	$0.00

nearcool

Benetech GT5105A Ground Earth Resistance Tester (Battery Included) with Data Logging, Testing Probes & Leads, Built-In Electrical Multimeter for Sizing and Projecting Grounding Grids Discount

Description

Additional Information

Wintact by Benetech WT87A Digital Impeller Anemometer Wind Temperature Humidity Meter for Atmospheric Effects Observation Online Hot Sale

Benetech GT8911 Digital Hot Wire Anemometer Thermal Transducer with Retractable Flexible Gooseneck Rod, Built-In Battery, USB Output, Temperature and Humidity Data Logging Discount

[CLEARANCE] Benetech GT5206A Digital ELCB and RCD Tester (Battery Included) with Testing Probes & Leads for Electrical Wires, Circuit Breakers, and Residual Current Devices Fashion

[CLEARANCE] Benetech GT66 Multi-Purpose Wire Tracker (Battery Included) with Aligator Clip Probes & Leads for Power Cables, RJ11 Telephone Lines, RJ45 Ethernet Cables, Lighting Wires Fashion

[CLEARANCE] Wintact by Benetech WT63C Digital Vibration Meter (Battery Included) with 1KHz ~ 4KHz (HI) 10KHz ~ 1KHz (LO) Frequency Acceleration, Data Logging, Colored LCD Display, Flashlight on Sale